Offline image-to-print studio · Chrome, Android & desktop
● LOCAL · v0.6.1
01 Upload image02 Set colors or relief03 Size your print04 Export 3MF
Preview workspace
No upload to server
↥
Sample artwork
Drop, paste (Ctrl+V), or choose an image to start.
Exact color placement
Printable 3MF preview
Preparing sample image…
Build your print
All dimensions in mm
1 What type of 3MF?
Creates customer-ready flat artwork with a continuous backing layer and flush color regions. Ideal for AMS-style signs and logos.
2 Image settings
Whole picture preserves the visible image. Remove background traces the subject and uses a fitted backing. Automatic removal works best with a fairly plain background.
Printable palette Tap a swatch to remap
Touch up the image Draw in Top view
Tap a palette swatch to choose the pen color. Draw directly in Top view, or erase stray dots. Export uses your edits. Flat keeps every color at the same height, with a continuous backing under the whole model.
A one-color emboss, with an actual varying 3D surface instead of fake shading.
3 Print dimensions
Image height follows the original aspect ratio. The full finished size includes the chosen border.
4 Slicer & filament setup
Checking filament count…
5 FeedbackLike Flexi-style notes
Use this to save customer-facing notes or send problem reports with the current settings.
Runs locally — no account, server, or internet required. v0.6.1: guided picture-to-3MF walkthrough with Expert Mode, color editing, touch-ups, and 3 mm standard thickness.
PlasticImage 3MF v0.6.1 exports watertight smooth-outline mesh volumes and color metadata for Bambu Studio/OrcaSlicer. Import behavior differs among slicer versions, so verify the preview before printing. Photographs are reduced to a limited filament palette; one image cannot recover unseen 3D geometry. Height is exaggerated only in the viewer.
P3
Guided setup · Step 1 of 8
Welcome to PlasticImage 3MF
Live image previewChoose an image
Your image stays on this device. This preview shows the printable colors.
Let's make your image printable
Choose a picture, logo, or illustration. We'll walk you through the colors, cleanup, and printing settings before making the 3MF.
No picture selected yet. Select one above to continue.
How many filament colors?
Choose how many colors you'd like in the artwork. We'll always use maximum tracing detail and maximum edge smoothing automatically.
✓ Maximum detail is on. ✓ Maximum smoothing is on. These are always enabled; you don't need to adjust them.
For most four-filament printers, start with four art colors or fewer. You'll choose the backing filament separately.
Keep or remove the background?
Choose the version you want. The live preview will change as you select an option.
Need to paint or erase anything?
Draw directly on the live picture at left (above on phones). Erase stray dots or paint a selected filament color to repair a line.
You can also skip editing and continue. Any edits you make here will be included in the 3MF.
Check your filament colors
These are the colors detected from your picture. Tap any color square to change it, and choose a backing filament below. You can go Back without losing your choices.
Check your filament mapping before printing.
Flat or raised surface?
Choose how the colors print. Flat is recommended for signs and customer artwork.
Set the dimensions
The starting thickness is 3.0 mm, with a continuous backing underneath the artwork. You can change the size and thickness here without clearing your touch-ups.
Estimated height depends on your image proportions. The default thickness is 3 mm.
Your model is ready
Choose what to do next. All your colors, settings, and touch-ups are saved in the current model.
Ready to export.
Feedback is copied or downloaded for sharing; it isn't sent automatically.
UP NEXT: TOUCH UP YOUR PHOTOPaint or erase small details on the next screen.